Pulmonary Function Tests
What are pulmonary function tests?
Pulmonary function tests (PFTs) are noninvasive tests that show how well the lungs
are working. The tests measure lung volume, capacity, rates of flow, and gas exchange.
This information can help your healthcare provider diagnose and decide the treatment
of certain lung disorders.
There are 2 types of disorders that cause problems with air moving in and out of the
- Obstructive. This is when air has trouble flowing out of the lungs due to airway resistance. This
causes a decreased flow of air.
- Restrictive. This is when the lung tissue and/or chest muscles can’t expand enough. This creates
problems with air flow, mostly due to lower lung volumes.
PFT can be done with 2 methods. These 2 methods may be used together and perform different
tests, depending on the information that your healthcare provider is looking for:
- Spirometry. A spirometer is a device with a mouthpiece hooked up to a small electronic machine.
- Plethysmography. You sit or stand inside an air-tight box that looks like a short, square telephone
booth to do the tests.
- Tidal volume (VT). This is the amount of air inhaled or exhaled during normal breathing.
- Minute volume (MV). This is the total amount of air exhaled per minute.
- Vital capacity (VC). This is the total volume of air that can be exhaled after inhaling as much as you
- Functional residual capacity (FRC). This is the amount of air left in lungs after exhaling normally.
- Residual volume. This is the amount of air left in the lungs after exhaling as much as you can.
- Total lung capacity. This is the total volume of the lungs when filled with as much air as possible.
- Forced vital capacity (FVC). This is the amount of air exhaled forcefully and quickly after inhaling as much as
- Forced expiratory volume (FEV). This is the amount of air expired during the first, second, and third seconds of
the FVC test.
- Forced expiratory flow (FEF). This is the average rate of flow during the middle half of the FVC test.
- Peak expiratory flow rate (PEFR). This is the fastest rate that you can force air out of your lungs.
Normal values for PFTs vary from person to person. The amount of air inhaled and exhaled
in your test results are compared to the average for someone of the same age, height,
sex, and race. Results are also compared to any of your previous test results. If
you have abnormal PFT measurements or if your results have changed, you may need other
Why might I need pulmonary function tests?
There are many different reasons why pulmonary function tests (PFTs) may be done.
They are sometimes done in healthy people as part of a routine physical. They are
also routinely done in certain types of work environments to ensure employee health
(such as graphite factories and coal mines). Or you may have PFTs if your healthcare
provider needs help to diagnose you with a health problem such as:
- Respiratory infections
- Trouble breathing from injury to the chest or a recent surgery
- Chronic lung conditions, such as asthma, bronchiectasis, emphysema, or chronic bronchitis
- Asbestosis, a lung disease caused by inhaling asbestos fibers
- Restrictive airway problems from scoliosis, tumors, or inflammation or scarring of
- Sarcoidosis, a disease that causes lumps of inflammatory cells around organs, such
as the liver, lungs, and spleen
- Scleroderma, a disease that causes thickening and hardening of connective tissue
PFTs may be used to check lung function before surgery or other procedures in patients
who have lung or heart problems, who are smokers, or who have other health conditions.
Another use of PFTs is to assess treatment for asthma, emphysema, and other chronic
lung problems. Your healthcare provider may also have other reasons to advise PFTs.
What are the risks of pulmonary function tests?
Because pulmonary function testing is not an invasive procedure, it is safe and quick
for most people. But the person must be able to follow clear, simple directions.
All procedures have some risks. The risks of this procedure may include:
- Dizziness during the tests
- Feeling short of breath
- Asthma attack brought on by deep inhalation
In some cases, a person shouldn’t have PFTs. Reasons for this can include:
- Recent eye surgery, because of increased pressure inside the eyes during the procedure
- Recent belly or chest surgery
- Chest pain, recent heart attack, or an unstable heart condition
- A bulging blood vessel (aneurysm) in the chest, belly, or brain
- Active tuberculosis (TB) or respiratory infection, such as a cold or the flu
Your risks may vary depending on your general health and other factors. Ask your healthcare
provider which risks apply most to you. Talk with him or her about any concerns you
Certain things can make PFTs less accurate. These include:
- The degree of patient cooperation and effort
- Use of medicines that open the airways (bronchodilators)
- Use of pain medicines
- Stomach bloating that affects the ability to take deep breaths
- Extreme tiredness or other conditions that affect a person’s ability to do the tests
(such as a head cold)
How do I get ready for pulmonary function tests?
Your healthcare provider will explain the procedure to you. Ask him or her any questions
you have. You may be asked to sign a consent form that gives permission to do the
procedure. Read the form carefully. Ask questions if anything is not clear.
Tell your healthcare provider if you take any medicines. This includes prescriptions,
over-the-counter medicines, vitamins, and herbal supplements.
Make sure to:
- Stop taking certain medicines before the procedure, if instructed by your healthcare
- Stop smoking before the test, if instructed by your healthcare provider. Ask your
provider how many hours before the test you should stop smoking.
- Not eat a heavy meal before the test, if instructed by your healthcare provider
- Follow any other instructions your healthcare provider gives you
Your height and weight will be recorded before the test. This is done so that your
results can be accurately calculated.
What happens during pulmonary function tests?
You may have your procedure as an outpatient. This means you go home the same day.
Or it may be done as part of a longer stay in the hospital. The way the procedure
is done may vary. It depends on your condition and your healthcare provider's methods.
In most cases, the procedure will follow this process:
- You’ll be asked to loosen tight clothing, jewelry, or other things that may cause
a problem with the procedure.
- If you wear dentures, you will need to wear them during the procedure.
- You’ll need to empty your bladder before the procedure.
- You’ll sit in a chair. A soft clip will be put on your nose. This is so all of your
breathing is done through your mouth, not your nose.
- You’ll be given a sterile mouthpiece that is attached to a spirometer.
- You’ll form a tight seal over the mouthpiece with your mouth. You’ll be instructed
to inhale and exhale in different ways.
- You will be watched carefully during the procedure for dizziness, trouble breathing,
or other problems.
- You may be given a bronchodilator after certain tests. The tests will then be repeated
several minutes later, after the bronchodilator has taken effect.
What happens after pulmonary function tests?
If you have a history of lung or breathing problems, you may be tired after the tests.
You will be given a chance to rest afterwards. Your healthcare provider will talk
with you about your test results.
Before you agree to the test or the procedure make sure you know:
- The name of the test or procedure
- The reason you are having the test or procedure
- What results to expect and what they mean
- The risks and benefits of the test or procedure
- What the possible side effects or complications are
- When and where you are to have the test or procedure
- Who will do the test or procedure and what that person’s qualifications are
- What would happen if you did not have the test or procedure
- Any alternative tests or procedures to think about
- When and how will you get the results
- Who to call after the test or procedure if you have questions or problems
- How much will you have to pay for the test or procedure